![]() Tên thiết bị: TLP-3C Nhà sản xuất: Grandway Nước sản xuất: Trung Quốc |
The 2M Transmission Analyzer TLP-3C is a multi-functional and full- featured digital transmission system test device, designed for the installation test, engineering check and acceptance, daily maintenance of digital networks, mainly performing channel test, alarm analysis, fault finding and signalling analysis. In addition, this instrument further provides various protocol converters with one-way and bi-directional bit error test function. These capabilities make it ideal for field use.
Các chức năng cơ bản
1) Kiểm tra 2M
75Ω and 120Ω interfaces
HDB3 and AMI line codes
Out-of-service 2Mb/s, N×64kb/s BER testing
In-service framed and unframed double-channel testing
Frame data control and monitoring
Timeslot activity monitoring, FAS, N-FAS, TS16MFO analysis
Built-in 64kb/s tone channel listen capability
CAS and CCS signaling generation and monitoring
Round trip delay measurement
APS delay measurement
Extensive error and alarm generation
VF tone generation and measurement
Level measurement
Pulse mask measurement
Frequency and offset measurement
Clock slip measurement
Up to ±999ppm transmit clock deviation
Clock source: Internal, Interface or External 2M clock/signal
Real-time transmit circuit open/short indication
2) Kiểm tra Datacom
Datacom (V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A) interfaces BER Testing
ASYNC BER testing with baud rate 300b/s��38..4Kb/s
SYNC BER testing with data rate 300b/s��8Mb/s
DTE or DCE emulation
SYNC clock source and sense selection
Frequency measurement
Handshaking signals control and monitoring
3) Kiểm tra G.703 CO
G.703 CO 64kb/s BER testing
Octet timing control and monitoring
Frequency and offset measurement
Clock source: Internal, Interface selectable
4) Các chức năng khác
Real-time clock
Test pattern: PRBS, Fixed Code and 16-BIT User Word
Error injection: Single and Fixed Rate
Manual and auto-timer measurement
ITU-T G.821, G.826, and M.2100 performance analysis
Đặc điểm chính
Handheld design and easy-to-use
Full-featured measurements to 2M, Datacom
High resolution backlit large LCD screen, with adjustable contrast
Smart navigation mode and multi-languages displays
Extensive error and alarm generation, detection and indication
Histograms analysis of alarm and error events
Up to 99 days continuance test performance
Save/Recall of up to 7 user-defined setups and 435 sets of results
Up to 6 hours operation from a single battery charge
Built-in Li rechargeable battery and smart charger circuit
Can be charged with automobile cigarette lighter battery adapter
Upgradeable software via an integrated RS232C interface
Test results uploaded, conserved and printed by PCManager software
Các đặc tính kỹ thuật:
Mục | Diễn giải | ||
2M | Internal Clock | 2048kb/s ± 10ppm | |
Frequency Deviation | ±999ppm | ||
Giao tiếp đường dây | 75Ω (Unbalanced), 120Ω (Balanced); High Input Impedance >2KW | ||
Mã đường dây | HDB3, AMI | ||
Khung | Unframed, PCM30, PCM30CRC, PCM31, PCM31CRC | ||
Độ nhạy thu | > -43dB | ||
Tx Clock Source | Internal, Interface and External 2MHz clock or signal | ||
Pulse Mask | Comply with G.703 | ||
Jitter Measurement( optional) | Comply with O.172 | ||
Frequency Measurement | Accuracy: ±1Hz | ||
Offset Measurement | Accuracy: ±1ppm | ||
|
| ||
| |||
VF Measurement | Frequency: 200Hz -3400Hz, Accuracy: ±1Hz | ||
Level range :-60.00dBm - +3.14dBm | |||
Delay Measurement | Accuracy: ±1μs | ||
G.703 CO (Optional) | Line Rate | 64kb/s ± 100ppm | |
Line Interface | 120Ω, Balanced | ||
Line Code | AMI | ||
Datacom | Line Interfaces | V.24, V.35, V.36, X.21, RS-449, RS-485, EIA-530, EIA-530A | |
Data Rate | ASYNC | 300, 600bit/s, 1.2, 2.4, 4.8, 7.2, 9.6, 19.2, 38.4kb/s | |
SYNC | 300, 600bit/s, 1.2, 2.4, 4.8, 7.2, 9.6, 19.2, 38.4kb/s, N×64kb/s ( N=1-32),4M,8Mkb/s | ||
Mẫu kiểm tra | PRBS | 223-1,220-1, 215-1, 211-1, 29-1,26-1 | |
Fixed Code | 1111, 0000, 1010 | ||
16-BIT | User Programmable Word | ||
Các chỉ thị cảnh báo LED | Signal Loss, AIS, Frame Loss, MFrame Loss, Pattern Loss, Remote Alarm, Error, Clock Slip. | ||
Chèn lỗi | Type: BIT, FAS, CRC4, CODE, E-BIT | ||
Single, Fixed Rate : 10-2, 10-3, 10-4, 10-5, 10-6, 10-7 | |||
Phân tích hiệu suất | ITU-T G.821, G.826 and M.2100 | ||
Hiển thị | 320x240 pixel backlit monochromatic LCD | ||
Cổng nối tiếp | RS-232C | ||
Pin có thể sạc | NiMH batteries, continuous working for 6 hours | ||
Thời gian sạc | Tương đương 2 hours | ||
AC Power Adapter | Input: 100V-240VAC, 50/60Hz Output: 12VDC/1.5A | ||
TestManager Pro | WIN98/ME/NT/2000/XP | ||
Kích thước | L×W×H 200mm × 160mm × 45mm | ||
Nhiệt độ vận hành | 0-50 độ C | ||
Nhiệt độ lưu trữ | -20 - 70 độ C | ||
Độ ẩm | 5% - 95% non-condensing |
Các phụ kiện chuẩn:
Các mục chuẩn | Đơn vị | SL. | Các mục chuẩn | Đơn vị | Sl. |
TLP-3C 2M Transmission Analyzer | pcs. | 1 | Simulation software | pcs. | 1 |
75Ω BNC/L9 E1 test cable | pcs. | 2 | Carrying case | pcs. | 1 |
BNC/BNC cable | pcs. | 1 | User's manual | pcs. | 1 |
RS232 serial upgrading cable | pcs. | 1 | Warranty card | pcs. | 1 |
DATA converting line (36PIN to 44PIN) | pcs. | 1 | Certificate of conformity | pcs. | 1 |
X.21 testing line | pcs. | 1 | V.35 testing line | pcs. | 1 |
V.24 testing line | pcs. | 1 | V.11 testing line | pcs. | 1 |
|
|
| AC adapter | pcs. | 1 |