

DCRS 9800 Core Chassis Switch là thế hệ lớp mô-đun Switch 100G mới với công suất tối đa cho các dịch vụ tập hợp 10G chẳng hạn như các core network hoặc dữ liệu trung tâm giải pháp lớn.
• Tối đa 768 10GB tổng hợp
• 40 GB/100 GB tương lai truy cập
• Dự phòng Switching Buss và Power supply
• Hổ trợ kép IPv4/IPv6 và MPLS VPN
• 7.68 Tb switching capacity,hổ trợ UP 15.36 Tbps
{tab=Ứng dụng}

{tab=Tham số}
| Items | DCRS-9808 | DCRS-9816 |
| Slot | 2 management slots | 2 management slots |
| 8 business slots | 16 business slots | |
| Business Ports | 10/100/1000BASE-T: MAX 192 | 10/100/1000BASE-T: MAX 384 |
| 1000Base-SX: MAX 192 | 1000Base-SX: MAX 384 | |
| 1000Base-LX: MAX 192 | 1000Base-LX: MAX 384 | |
| 10G: MAX 192 | 10G: MAX 384 | |
| Console | 1 | 1 |
| Performance | ||
| Backplane Bandwidth | >1.54Tbps | >3.1Tbps |
| Switching Capacity | 768Gbps | 1.54Tbps |
| Forwarding Rate | 420Mpps | 950Mpps |
| MAC Table | MAX 1M | MAX 2M |
| Routing Table | MAX 256K | MAX 512K |
| VLAN Table | 4K | 4K |
{tab=Thông tin kỹ thuật}
| Features | ||
| Forwarding | Storage and forwarding | |
| L2 Features | IEEE802.3(10Base-T) | |
| IEEE802.3u(100Base-TX) | ||
| IEEE802.3z(1000BASE-X) | ||
| IEEE802.3ab(1000Base-T) | ||
| IEEE802.3ae(10GBase) | ||
| Loopback interface | ||
| 9k Jumbo Frame | ||
| Port loopback detect | ||
| LLDP and LLDP-MED | ||
| UDLD | ||
| Support LACP 802.3ad, max 128 group trunk with max 8 ports for each trunk, | ||
| Support link aggregation by manual | ||
| IEEEE802.1d(STP) | ||
| IEEEE802.1W(RSTP) | ||
| IEEEE802.1S(MSTP) Max 48 instance | ||
| Root Guard | ||
| Bpdu Guard | ||
| Bpdu forwarding | ||
| Support one to one or any to one mirror | ||
| Support mirror cross business boards | ||
| Support RSPAN | ||
| IGMP v1/v2/v3, IGMP v1/v2/v3 Snooping, IGMP proxy | ||
| ICMPv6, ND, ND snooping, MLDv1/v2, MLDv1/v2 snooping | ||
| Support GVRP | ||
| Port/ MAC/ IP segment/ Portocol/ Voice/ Private/ Vlan support | ||
| Multicast Vlan register/MVR for IPv4 and IPv6 | ||
| Support port-based 802.1Q, 4K VLAN | ||
| Support QinQ and selective QinQ | ||
| DFI/Broadcast/Multicast strome control | ||
| MAC binding(Ipv4 /Ipv6), MAC filter, MAC limit, | ||
| IP source guard | ||
| Port binding(Ipv4 /Ipv6) | ||
| Support smart link (or named flexible link) | ||
| L3 Features | IP Protocol(IP support both of IPv4 and IPv6) | |
| Default Routing, Static Routing, Black hole route, VLSM and CIDR, | ||
| RIPv1/V2, OSPFv2, BGP4, support MD5 authentication LPM Routing | ||
| OSPFv3, BGP4+ support | ||
| Policy based Routing(PBR) for IPv4 and IPv6 | ||
| Support 4 byte BGP AS number | ||
| Support GR for OSPF and BGP | ||
| VRRP, VRRP v3 | ||
| DVMRP, PIM-DM, PIM-SM, PIM-SSM | ||
| Support MSDP(Multicast Source Discovery Protocol) | ||
| Static Multicast route | ||
| Multicast edge configure | ||
| Any cast RP for Ipv4 and Ipv6 | ||
| PIM-SM/DM/SSM for IPv6, 6 to 4 Tunnels, configured Tunnels, ISATAP | ||
| Multicast receive control | ||
| Illegal multicast source detect | ||
| URPF for IPv4 and IPv6 | ||
| Support BFD | ||
| Support ECMP(Equal Cost Multi-Path)with maxim 8 groups | ||
| ARP guard, Local ARP proxy, Proxy ARP, ARP binding, Gratuitous ARP, ARP limit | ||
| Tunnel technical | Support manual configure IPv4/IPv6 tunnel | |
| Support 6to4 tunnel | ||
| Support ISATAP tunnel | ||
| Support GRE tunnel | ||
| MPLS | Support 255 VRF/VFI | |
| Support LDP | ||
| L3 MPLS VPN | ||
| L2 VLL/VPLS | ||
| MPLS/VPLS proxy | ||
| MPLS-TE/FRR* | ||
| Support cross domain MPLS VPN | ||
| Support MPLS QOS | ||
| supported by software upgrade in future | ||
| QoS | 8 hardware queues per port | |
| Support traffic classification based on IEEE 802.1p, ToS, port and DiffServ | ||
| Support SP, WRR.SWRR | ||
| Support Traffic Shaping | ||
| Support rate limit for import and export | ||
| Support PRI Mark/Remark | ||
| Support WRED | ||
| Support 2 buckets with dual rate and triply color mark | ||
| ACL | Support standard and expanded ACL | |
| Support IP ACL and MAC ACL, | ||
| Support ACL based on source/definition IP, MAC, L3 protocol, TCP/UDP port number, IP PRI(DSCP, ToS, Precedence), Time | ||
| Support ingress and egress ACL | ||
| ACL-X | Support time-based security auto-negotiation | |
| ACL rules can be configured to port, VLAN, VLAN routing interfaces | ||
| Can be used for QoS classification | ||
| Anti-attack and Security | S-ARP: ARP inspection, defense ARP-DOS attack and address clone | |
| Anti-Sweep: prevent ping Sweep | ||
| S-ICMP: resist PING-DOS attack, ICMP unreachable attack | ||
| S-Buffer: prevent DDOS attack | ||
| Switch engine CPU protection | ||
| Key message priority: secure processing of key legal messages | ||
| Port credit: inspect illegal DHCP Server, Radius Server. Connection via credit port only | ||
| Advanced LPM: filter “Bluster”, “zero day” and ”SQL slammer warm” | ||
| Support URPF, avoid IP address clone | ||
| All the above technologies efficiently prevent various DOS attack (e.g. ARP, Synflood, Smurf, ICMP attack), support ARP monitoring, defense Worm, Bluster, check sweep and raise alarm | ||
| DHCP | Support DCHP Client, Relay, Snooping, Option 82 | |
| DHCP Server for IPv4 and IPv6 | ||
| DHCP v6 and DHCP snooping V6 | ||
| DNS | DNS Client | |
| DNS proxy | ||
| Ring Protocol | MRPP (Multi-Ring Protect Protocol) | |
| Access security | 802.1X | |
| Port, MAC, username based | ||
| Support account based on time length and traffic | ||
| Support guest vlan and auto vlan | ||
| Work with private client can manage P2P traffic | ||
| MAC Based AAA(Client free access) | ||
| PPPOE/PPPOE+ forwarding | ||
| AAA | Support RADIUS AAA for IPV4 and IPv6 | |
| TACACS+ AAA | ||
| Configuration and Management | Support CLI, Telnet, WEB, SSH and SSL | |
| Support SNMPv1/v2c/v3 | ||
| Support MIB | ||
| Support RMON 1, 2, 3, 9 | ||
| Power Saving Technology | Support reduce power consumption, improve cooling and reliability | |
| Flexible fan and port management to save power consumption | ||
| SysLog | Support save syslog and trap to local device or server | |
| Support max 8 servers for syslog or trap receive | ||
| NMS | Strict access control by ACL and QOS | |
| Access the switch through AAA or Local Authentication | ||
| Support SNTP and NTP | ||
| Setup time zone and Daylight Saving time | ||
| Supervision and Trouble Shooting | Supervise abnormity of task, memory, CPU, stack, switch chip, temperature and raise alarm | |
| Support Sflow | ||
| Support IPFIX (IP Flow Information Export) | ||
| Ping and trace route command | ||
| Configuration Management | Configuration file storage | |
| Command operation log | ||
| Support dual images and files startup | ||
| Support FTP/TFTP server or client upgrade | ||
| Support X-modem protocol transfer the file | ||
| OAM | Support 802.3ah | |
| Support 802.1ag | ||
| Physical | ||
| Dimension(W x D x H) | 482.6x450x708.4 mm(16U) | 482.6x450x841.7 mm(19U) |
| Relative Humidity | 10%~90%, non-condensing | |
| Storage Temperature | -40℃~70℃ | |
| Operating Temperature | 0°C~40°C | |
| Power | AC: Input 200~240V, 50~60 Hz; | AC: Input 90~260V, 50~60 Hz: |
| Power Consumption | ≤900W | ≤1600W |
| MTBF | >250,000 hours | >250,000 hours |
| MEF Comply | Comply MEF 9,14 | Comply MEF 9,14 |
| MEF Comply | Comply MEF 9,14 | Comply MEF 9,14 |
{tab=Thông tin đặt hàng}
| Product | Description | |
| DCRS-9816 | 18 slot backbone switch with 2 management cards. | |
| The switch can support max 16 business cards. | ||
| The switch can support redundant power supply to provide high availability networks. | ||
| DCRS-9808 | 10 slot backbone switch with 2 management cards. | |
| The switch can support max 8 business cards. | ||
| The switch can support redundant power supply to provide high availability networks. | ||
| MRS-9800-AC | 220V AC power supply with 600W | |
| MRS-9800-MI | DCRS-9800 management card,must configure at least 1. Select 2 cards construct the redundant environment. | |
| MRS-9800-24GT | DCRS-9800 business card,24 ports10/100/1000BaseT GE ports. Support dual stack and mpls by hardware | |
| MRS-9800-24GB | DCRS-9800 business card,24 ports1000Base-X(SFP)GE ports. Support dual stack and mpls by hardware | |
| MRS-9800-4XFP | DCRS-9800 business card,4 ports 10GE (XFP)ports. Support dual stack and mpls by hardware | |
| MRS-9800-24SFP+ | DCRS-9800 business card,24 ports 10GE (SFP+)ports. Support dual stack and mpls by hardware |
|